Loop Technology Loop Technology - Vision in Motion Telephone +44 (0) 1305 257108 or email info@looptechnology.com
Home About Loop Technology Vision, Motion & Robotics Solutions Automation & Software Development Services Case Studies Contact Loop Technology
Automation Systems Support
We can be there for you from the design stage right through to operator training and system servicing.
  Consultancy
  Installation
  Training
  System Support
Fibre Eye Composite Fibre Inspection System
Fibre Eye Composite Fibre Inspection System
We are taking composite fibre inspection into the future with our new state of the art 'FibreEYE' Composite Fibre Inspection System designed for in-process verification of the composite fibre deposition process...
Find out more >>
Client Testimonials
 …for any further automation projects you will be considered as we have been very impressed generally with your company and have enjoyed working with you. 
Dave Wigman, Cynergy 3
 What a pleasure it has been working with your group to overcome the problems, the response from your team has been second to none and I would have no problems with working with you again, hopefully soon if the project progress’s properly. The team have been easy to work with and I hope I haven’t been too much of a pain, you seem to have an easy communication logic and can solve many of the problems I have come up against within an hour, even if it’s not your problem to start with. Once again thank you for all your hard work on this project.
Derek Sumsion,
Mechanical Design Engineer, Tubetech International Limited
 Thanks to you and your team for the effort and hard work you have all put in over the bank holiday, and the progress speaks for itself. 
Jonathan James,
Production Planning Manager, ThyssenKrupp
www.looptechnology.com

Case Studies

Please find a selection of some of the projects we have delivered over the last few years. Please note this is only a small selection of projects as many of our projects are confidential and therefore cannot be listed.


Case Study: Glass Arrissing System
Case Study: Glass Arrissing System

Loop developed and supplied the vision system and software to communicate with the robot for a Glass Arissing System...

Case Study: Automated Palletising for automotive manufacturer
Case Study: Automated Palletising for automotive manufacturer

Loop developed an automated system to palletise brake disc castings at the end of a production line to handle more than five hundred different product variants, weighing 6kg-23kg, and stacked in one of six predetermined stacking patterns...

Case Study: Billet Palletising for ThyssenKrupp
Case Study: Billet Palletising for ThyssenKrupp

Loop were asked to automate the process of weighing, stacking and printing on a range of billet sizes and shapes. The robotic system comprises of a Kuka KR-120 6 axis robot with a U block electro-permanent magnet attached to the robots head...

Case Study: Printer alignment system for DEK Printing Machines Limited
Case Study: Printer alignment system for DEK Printing Machines Limited

Loop were commissioned to create a printer alignment system consisting of a special test harness (the mass of metal and wires in the middle of the image) that attaches to a DEK printer...

Case Study: Control and metrology system for a laser sintering machine
Case Study: Control and metrology system for a laser sintering machine

Loop are currently developing a control and metrology system for a laser sintering machine. In addition to the metrology aspect of the project we are also looking into the control software required to operate a laser sintering machine which is used to produce complex 3D metallic parts...

Case Study: Automated Palletising for major soft drink manufacturer
Case Study: Automated Palletising for major soft drink manufacturer

Loop developed a system to identify product positions on a pallet accurately enough for a robot manipulator to pick and place pallets moved around a warehouse on an automated conveyor system...

Case Study: Engine Marker inspection system for automotive manufacturer
Case Study: Engine Marker inspection system for automotive manufacturer

Loop provided a a complete control cabinet featuring a custom software solution featuring a touch screen interface for a custom machine being developed to mark the vehicle identification number on engines as they enter the production line...

Case Study: LED inspection system for automotive manufacturer
Case Study: LED inspection system for automotive manufacturer

Loop provided a vision system to Ford Motor Company in St Petersburg, capable of ‘counting’ the LEDs on test vehicles as they moved down the line. The system was fully integrated into Ford’s production management system using live vehicle data...

Automation Software Development Case Studies
Other Software Development Case Studies

We have developed many bespoke systems for our clients including:
 
Get in touch with us for more information or a no-obligation quote, we would be delighted to talk to you. If you would prefer a face to face meeting we would be happy to visit your premises for a free audit to discuss how any solution or service from Loop Technology would benefit your organisation. Contact us today.
top of page
 
quick links
Copyright © 2009 - 2017 Loop Technology Limited. All rights reserved. Registered in England. Company No. 3498849. Terms | Privacy | Cookies. Website design and development by Boo&Stu.